Epson SC-S80600 Series User Manual page 108

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Item
Side Margin(Right)
Side Margin(Left)
Print Start Position
Media Check
Media Size Check
Media End Check
Media Skew Check
Media End Option
Btw Pages Nozzle Check
Using the Control Panel Menu
Parameter Explanation
* Choose the width of the right margin when media is loaded in the printer.
3 to 25 mm (5 )
See the following for more information.
"Printable area" on page 57
U
*
Choose the width of the left margin when media is loaded in the printer.
3 to 25 mm (5 )
See the following for more information.
"Printable area" on page 57
U
* Adjust this parameter if you want to print from the near center of the
0 to 800 mm (0 )
media or if you want to shift the printed area left from the Side
Margin(Right) setting. The area between the right edge of the media and
Print Start Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the width selected
for Side Margin(Right) will be left blank. See the following for more
information.
"Printable area" on page 57
U
ON* Choose whether the printer automatically detects (ON), or does not
automatically detect (OFF), the edges of the media. Try OFF if the printer
OFF
displays a Media Size Error when the media is correctly loaded. Note,
however, that the printer may print beyond the edges of the media when
OFF is selected. Ink used outside the edges of the media will stain the
inside of the printer. We generally recommend to operate with this setting
set to ON.
ON*
Choose whether the printer automatically detects (ON) or does not
automatically detect (OFF), the end of the media. Try OFF if the printer
OFF
displays Media Out when the media is correctly loaded. We generally
recommend to operate with this setting set to ON.
ON* When skewed media is detected, the printer will either stop printing and
display an error (ON) or continue printing (OFF). ON is recommended in
OFF
most circumstances, as skewed media may cause the printer to jam.
*
When replacing media while printing, select either Continue (print the
Continue
remaining data after replacement) or Stop Printing (do not print).
Stop Printing
108