Epson SC-S80600 Series User Manual page 17

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
B
Heater temperature
From left to right, this display shows the settings for
the pre-heater, platen heater, and after heater. The
thermometer icons give a rough indication of the
current temperatures of the heaters.
: The heater has reached the selected
temperature.
: The heater has not reached the selected
temperature.
C
Feed adjustment information during printing
This information is displayed when the adjustment
value is specified during printing.
"Correcting Banding" on page 55
U
D
Media info
❏
From left to right, this display shows the number for
the selected media, platen gap, media width, and
media remaining.
❏
The selected platen gap is shown as follows.
: 1.6
: 2.0
: 2.5
❏
The media remaining is not displayed if OFF is selected
for Length in the Media Remaining menu.
"Media Remaining" on page 103
U
E
Status of the ink cartridge/ink supply unit
Displays the approximate level of remaining ink and
the current status. When ink runs low or an error
occurs, the display changes as shown below.
Normal
1 Status indicators
These indicate the status of the ink cartridges/ink
supply units, as follows.
Introduction
Warning or error
17
: Ready to print. The height of the
indicator changes with the level of ink
remaining in the cartridge/ink supply
unit.
: Ink is low. You need to prepare a new
ink cartridge/ink supply unit.
: The level of ink remaining has reached
the limit. Replace the old ink cartridge/
ink supply unit with a new one.
: The ink cartridge/tray is not locked.
Lock it.
: No ink cartridge/ink supply unit is
inserted. Insert an ink cartridge/ink
supply unit, and then lock the ink
cartridge/tray.
: An error occurred. Check the message
on the screen, and clear the error.
: A cleaning cartridge/cleaning ink
supply unit is inserted. The height of
the indicator changes with the level of
cleaning liquid remaining in the
cartridge/cleaning ink supply unit.
2 Ink color codes
SC-S80600 Series/SC-S80600L Series
OR : Orange
LK : Light Black
BK : Black
C : Cyan
M : Magenta
Y : Yellow
R : Red
LC : Light Cyan
LM : Light Magenta
WH : White