CHAPTER 3. Mounting and Replacing Modules
Chassis
Basic chassis
(OfficeServ Access)
Expansion chassis
(OfficeServ Expansion)
Functions of the chassis back panel components are as follows:
Component
1
Power switch
2
Power Connector connect-
ing the basic chassis to the
expansion chassis
3
Power input/output connec-
tor
4
AC LED
Page 3-2
Table 3.1 Applicable Modules per Slot
Slot
Slot 0
Slot 1
Slot 2
Slot 3, 4, 5
Slot 0
Slot 1, 2
Slot 3
Slot 4, 5
Checking Slots
The WIM module can only be mounted in slot 1 of the basic and expansion chassis.
The TEPRI module can only be mounted in slots 3, 4 and 5 of the basic chassis
and slot 3 of the expansion chassis.
1
2 3
Figure 3.2 Back Panel Configuration
Table 3.2 Back Panel Components
Switches on/off the system power.
Provides power from the basic chassis to the expansion chassis
For connecting to power cables (consists of three inlets/outlets)
Turns on for normal AC input power
OfficeServ 7200 Installation Guide
Applicable Modules
For MCP
All modules except MCP, LCP, TEPRI and LIM
All modules except MCP, LCP, TEPRI and WIM
All modules except MCP, LCP and WIM
For LCP
All modules except MCP, LCP, TEPRI and LIM
All modules except MCP, LCP and WIM
All modules except MCP, LCP, TEPRI and WIM
4 5
6
Function
© Samsung Business Communications