Samsung OfficeServ 7200 Installation Manual page 64

Hide thumbs Also See for OfficeServ 7200:
Table of Contents

Advertisement

CHAPTER 7. Connecting Stations and Additional Equipment
2.4.1 Connecting OfficeServ Manager to LAN Port
Connect the PC to the system through the LAN port. The PC is called a 'remote Office-
Serv Manager' which enables remote management of the system through the network.
This section describes how to connect a remote OfficeServ Manager (OSM) to the
system and how to configure the software.
The hardware connection via the LAN between the OfficeServ 7200, equipped with
a LIM module, and the OSM is as follows:
The procedure for connecting an OSM using a modem is as follows:
1. Set network parameters through MMC 830.
2. Set OSM parameters.
Detail procedures for each of the steps above are as follows.
Page 7-14
MCP
OfficeServ 7200
OR
MCP
LIM
OfficeServ 7200
Figure 7.19 OSM Connection to LIM Module via LAN
OfficeServ 7200 Installation Guide
LAN
LAN
© Samsung Business Communications
OSM
OSM

Advertisement

Table of Contents
loading

Table of Contents