CHAPTER 3. Mounting and Replacing Modules
Switch
S2
For memory backup, set to On before mounting in each slot
S3
SW1~SW4
SW6~SW8
2.
Align the connectors of the MCP module with those of the optional module
(MIS, RCM, or MFM), and firmly press the optional module downward with
both hands (Fig. 3.4).
Page 3-4
Table 3.3 Switch Settings
Settings
For domestic use, set all switches to Off.
Sets the number of digits for C.O./extension lines and extension
groups.
SW6
On : 4 digits for C.O. line
Off : 3 digits for C.O. line
SW7
On : 4 digits for an extension group
Off : 3 digits for an extension group
SW8
On : 4 digits for an extension number
Off : 3 digits for an extension number
RCM
MIS
Figure 3.4 Mounting Optional Modules
OfficeServ 7200 Installation Guide
MFM
© Samsung Business Communications