Samsung OfficeServ 7200 Installation Manual page 37

OfficeServ 7200 Installation Guide
3.1.2 MGI Module
The procedure for setting the MGI module switches and mounting MGI2D optional
modules is as follows:
1. Set the memory backup switch on the MGI module (Fig. 3.11).
2. Align the connector on the MGI module with the connector on the optional
MGI2D module and press the optional module downward. Up to four optional
modules can be mounted (Fig. 3.12).
© Samsung Business Communications
Figure 3.11 MGI Module Switch Setting
MGI2D
Figure 3.12 Mounting MGI2D Optional Modules on MGI Module
CHAPTER 3. Mounting and Replacing Modules
OFF : No memory backup
ON : Available for memory backup
(default value)
MGI2D
MGI2D
MGI2D
Page 3-9