Connecting Additional Equipment; Connecting Moh/Bgm Equipment - Samsung OfficeServ 7200 Installation Manual

OfficeServ 7200 Installation Guide
2. Insert the KDB module into the expansion module connector and fasten with
screws (Fig. 7.14).
2

Connecting Additional Equipment

This section describes how to connect optional equipment such as Music on Hold
(MOH)/Background Music (BGM) sources, external page devices, common bells,
and PCs for PCMMC/SMDR/CTI.
2.1

Connecting MOH/BGM Equipment

The OfficeServ 7200 system provides internal tone/music and external sources per
C.O. or extension lines as music sources for calls on hold and background music.
Two external music sources are offered. Connect the music sources to the MISC1
port of the MCP module (Fig. 7.15). The MIS optional module must be installed on
the MCP module.
© Samsung Business Communications
KDB
Figure 7.14 Installing KDB Module (2)
User MOH/BGM source
User MOH/BGM source
Figure 7.15 Connecting MOH/BGM Sources
CHAPTER 7. Connecting Stations and Additional Equipment
MISC 2
MISC 1
Page 7-11