Chapter 2 Installing Chassis; Summary Of System Installation Procedure; Selecting Installation Method - Samsung OfficeServ 7200 Installation Manual

CHAPTER 2
Installing Chassis
This chapter describes how to install an OfficeServ 7200 chassis on the floor, inside
a rack or on a wall, depending on the installation environment.
1

Summary of System Installation Procedure

The system installation procedure is as follows.
1) Install the OfficeServ 7200 chassis on the floor, inside a rack or on the wall
depending on the installation environment.
2) Connect earth to the ground lug behind the basic chassis.
3) Put the MCP module into slot 0 of the basic chassis. If there is an expansion
chassis, mount the LCD module in slot 0 of the expansion chassis.
4) Mount interface modules into the universal slots (slot 1 to slot 5).
5) Connect an external battery with the correct capacity.
6) Connect AC 110/220 V input power.
2

Selecting Installation Method

First decide if the chassis is/are to be installed on the floor, inside a 19-inch rack or
on a wall. This will depend on where you wish to install and the number of chassis.
© Samsung Business Communications Page 2-1