Create An Advanced 802.1Q Vlan - NETGEAR GS316EP User Manual

6. In the Advanced 802.1Q VLAN section, click the ACTIVATE MODE button.
A pop-up window opens, informing you that the current VLAN settings will be lost.
7. Click the CONTINUE button.
Your settings are saved and the pop-up window closes. By default, VLAN 1 is added
and all ports are made untagged members of VLAN 1.
For information about creating an advanced 802.1Q VLAN, see Create an advanced
802.1Q VLAN on page 50.
8. To change the port tagging for the default VLAN (VLAN 1), do the following:
a. In the table, click 1 or Default (you can click anywhere in the row for VLAN 1).
b. Click the EDIT button.
c. Select the port tags and whether ports are members of the VLAN through a
combination of the following actions:
• T: Make the port a tagged member of the VLAN.
• U: Make the port an untagged member of the VLAN.
• E: Exclude the port from the VLAN.
• Tag All: Make all ports tagged members of the VLAN.
• Untag All: Make all ports untagged members of the VLAN.
• Exclude All: Exclude ports from the VLAN.
d. Click the APPLY button.
Your settings are saved.

Create an advanced 802.1Q VLAN

In an advanced 802.1Q VLAN configuration, you can set up VLANs to which you can
add tagged or untagged ports. Port tagging allows a port to be associated with a
particular VLAN and allows the VLAN ID tag to be added to data packets that are sent
through the port. You can create a total of 64 advanced 802.1Q VLANs for these switches.
To create an advanced 802.1Q VLAN and assign ports as tagged or untagged
members:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
Use VLANS for Traffic
Segmentation
Gigabit Ethernet Plus Switches
50 User Manual