Delete Certificates For Https Access - NETGEAR GS316EP User Manual

To transfer an SSL certificate from a TFTP server to the switch:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select SETTINGS > WEB ACCESS > Certificate Configuration.
5. In the Certificate Update menu, TFTP Server IP address field, type in the IP address.
6. In the Remote File Path field, type in the path to the PEM file on the TFTP server.
7. In the Remote File Name field, type in the PEM file name, including the .pem
extension.
8. Select the Start File Transfer check box.
9. Click the APPLY button.
The Certificate Generation Status field displays Certificate generation in progress.
When the certificate is generated, the Certificate Present field displays Yes.
You can now enable HTTPS.

Delete certificates for HTTPS access

You can delete previously created certificates for HTTPS access.
Note: You must disable HTTPS before you can delete a certificate. For more information,
see Configure HTTPS access settings on page 78.
To delete an SSL certificate:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
Maintain and Monitor the Switch
Gigabit Ethernet Plus Switches
81 User Manual