1000Base-X Sfp Slots - NETGEAR GS316EP User Manual

Gigabit ethernet plus switches
Hide thumbs Also See for GS316EP:
Table of Contents

Advertisement

Table 2. Model GS316EP, GS316EPP LEDs on the front panel
LED
Power LED
PoE Max LED
Left port LED
Right port LED

1000BASE-X SFP slots

To enable fiber, copper, or long-distance connections on the switch, SFP slots
accommodate standard 1G SFP transceiver modules, which are sold separately.
For information about specific NETGEAR SFP transceiver modules and cables that are
supported for the switch, visit netgear.com/business/wired/switches/ and click the
ACCESSORIES tab, or see the datasheet for your specific switch.
Hardware
Gigabit Ethernet Plus Switches
Description
Solid green: The switch is powered on and operating normally.
Off: Power is not supplied to the switch.
Off: Sufficient (more than 7W of) PoE power is available.
Solid yellow: Less than 7W of PoE power is available.
Blinking yellow: At least once during the previous two minutes, less than 7W of PoE
power was available.
Solid green: 1000 Mbps link on this port.
Blinking green: 1000 Mbps activity on this port.
Solid yellow: A valid 10 Mbps or 100 Mbps port link is established.
Blinking yellow: 100 Mbps or 10 Mbps activity on this port.
Off: No link is detected on this port.
Solid green: The port is delivering PoE power.
Off: The port is not delivering PoE power.
Solid yellow: A PoE fault occurred.
9
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs316epp

Table of Contents