Factory Default Settings - NETGEAR GS316EP User Manual

Factory default settings

You can return the switch to its factory settings. For more information, see Return the
switch to its factory default settings on page 74.
The switch resets and returns to the factory settings shown in the following table.
Table 7. Factory default settings
Feature
Switch password
IP address
Subnet mask
DHCP mode
IGMP snooping
LAGs
VLANs
802.1p/DSCP-based QoS
Port-based QoS
Rate limiting
Broadcast filtering
Loop detection
Loop prevention
Port speed
Flow control
Port mirroring
Factory Default Settings and
Technical Specifications
Gigabit Ethernet Plus Switches
Setting
password
192.168.0.239 (if the switch is not connected to a network with a DHCP server)
255.255.255.0
Enabled
Enabled
None configured
Disabled. If enabled, by default, all ports are members of VLAN 1.
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Autonegotiation
Disabled
Disabled
106 User Manual