Table of Contents
Advertisement
Insight Managed 28-Port and 52-Port Gigabit Ethernet (PoE+) Smart Cloud Switch
SFP and SFP+ Ports for Fiber Connectivity
To enable fiber connections on the switch, SFP and SFP+ fiber ports accommodate
standard small form-factor pluggable (SFP) gigabit interface converters (GBICs, also
referred to as transceiver modules). GBICs are sold separately from the switch.
The switch supports the NETGEAR SFP and SFP+ transceiver modules that are listed in
the following table.
Table 5. Supported SFP and SFP+ transceiver modules
Speed and Medium
1G Ethernet short-reach fiber
1G Ethernet long-reach fiber
1G Ethernet copper
10GBASE short-reach fiber
10GBASE long-range fiber
10GBASE long-range fiber
10GBASE long-range fiber lite
10GBASE copper
10G Ethernet copper
10G Ethernet copper
For more information about NETGEAR SFP and SFP+ transceiver modules, visit
netgear.com/business/products/switches/modules-accessories.
Note: If you use a third-party passive direct-attach cable (DAC), the length of the cable
must not exceed 16.4 feet (5 meters).
USB Port
The switch provides one USB 2.0 port that lets you upload firmware, upload or download
(back up) the configuration settings file, and download a memory dump (for debugging
purposes) using a USB storage device.
Hardware Overview
Model
Description
AGM731F
SFP transceiver 1000BASE-SX
AGM732F
SFP transceiver 1000BASE-LX
AGM734
SFP transceiver 1000BASE-T
AXM761
SFP+ transceiver 10GBASE-SR multimode
AXM762
SFP+ transceiver 10GBASE-LR single
mode
AXM763
SFP+ transceiver 10GBASE-LRM
multimode
AXM764
SFP+ transceiver 10GBASE-LR Lite single
mode
AXM765
SFP+ Transceiver 10GBASE-T
AXC761
SFP+ DAC cable, 3 feet (1 meter)
AXC763
SFP+ DAC cable, 9 feet (3 meters)
21
Hardware Installation Guide
Advertisement
Table of Contents
