Panasonic NN-CS89LB Manual page 66

Hide thumbs Also See for NN-CS89LB:
Table of Contents

Advertisement

Before Requesting Service
PROBLEM
Oven will not turn on.
Oven will not start
cooking.
"HOT" appears in the
display window.
The "
" appears in the
display Window.
"H97", "H98" or "H00"
appears in the display
window.
"DEMO MODE PRESS
ANY KEY" or "D" appears
in the display window.
The control panel keys do
not respond when tapped.
"U14" appears in the
display window only.
If it seems there is a problem with the oven, contact an authorized Service Center.
POSSIBLE CAUSE
The oven is not plugged in
securely.
Circuit Breaker or fuse is tripped
or blown.
There is a problem with the
outlet.
The door is not closed
completely.
Start/Set key was not touched
after programming.
Another program has already
been entered into the oven.
The program has not been
entered correctly.
Stop/Reset key has been
touched accidentally.
The cavity is overheated.
The Child Lock was activated by
tapping Start/Set key 3 times.
This display indicates a problem
with the microwave generation
system.
The oven is under demonstration
mode.
The oven may be in stand-by
mode.
The water tank is empty.
- Eng-66 -
(continued)
REMEDY
Remove plug from outlet, wait 10
seconds and re-insert.
Contact the specified service center.
Plug another appliance into the outlet
to check if the outlet is working.
Close the oven door securely.
Touch Start/Set key.
Touch Stop/Reset key to cancel the
previous program and program again.
Program again according to the
Operating Instructions.
Program oven again.
Operate again after it cools down.
Deactivate Lock by tapping
Stop/Reset key 3 times.
Contact the authorised service center.
Tap Micro Power key once, Start/
Set key 4 times, Stop/Reset key 4
times.
Ensure the oven is plugged in. Open
and close the door to activate.
Full it with water and tap Stop/Reset
to reset.

Advertisement

Table of Contents
loading

Table of Contents