Table of Contents
Advertisement
► Error Code
M2–1134
M2–1135
► Error message
Paper jam in tray 2
Paper jam in tray 1
► Symptom
Paper jam has occurred inside the machine. (Feed drive unit is defective / Feed 2 sensor is defective.)
► Troubleshooting method
•
M2–1134 : The leading edge of the paper has not reached the feed 2 sensor within the specified time.
•
M2-1135 : The paper has not left from the feed 2 sensor within the specified time.
1) Open the side cover. Remove the jammed paper.
2) If jammed paper occurs continually, check the following.
a) Enter SVC mode. Execute Regi/MP/feed motor test. If the motor operation is normal, go to step d).
b) Remove the rear cover. Check if the Regi/MP/feed motor cable is connected correctly.
c) If the connection is OK, replace the main drive unit(JC93-00912A).
(Refer to 3.3.12. Main Drive unit)
d) If the Regi/MP/feed motor operation is normal, check the feed sensor.
e) If the sensor operation is abnormal, check the harness.
f) If the connection is OK, replace the feed sensor (0604-001381).
(Refer to 3.3.24. Feed Unit)
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Troubleshooting
4-148
Advertisement
Table of Contents
Troubleshooting
