Table of Contents
Advertisement
► Error Code
A1–1111
A1–1113
► Error message
Motor Failure: #A1-1111. Turn off then on. Call for service if the problem persists.
Motor Failure: #A1-1113. Turn off then on. Call for service if the problem persists.
► Symptom
Regi/MP motor does not operate. / Regi/MP motor is operating but machine recognizes status as "Stopped".
► Troubleshooting method
1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Open the side cover. Check if there are any foreign substances or paper around Regi./MP unit.
(Refer to 3.3.20. Side unit)
3) Remove the Rear-cover.
(Refer to 3.3.2. Rear cover)
4) Check if the Regi/MP motor connector is connected correctly.
5) If the connection is OK, turn the machine on. Enter the SVC mode. Select the motor test.
(Diagnostics > Engine Diagnostics > Engine Test Routines >100–0000)
a) If the motor does not operates,
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Troubleshooting
4-66
Advertisement
Table of Contents
Troubleshooting
