Samsung MultiXpress K4 Series Service Manual page 380

A3 mono copier
Table of Contents

Advertisement

4. Troubleshooting
► Error Code
M1–1610 / M1–1613
► Error message
Paper jam in MP Tray.
► Symptom
Paper jam has occurred in MP tray.
► Troubleshooting method
1) Open the side cover. Remove the jammed paper from the MP tray.
2) If this jam error occurs frequently, check the followings.
a) Check if the MP tray paper stopper is moved out of position. If yes, carefully push the MP tray paper stopper
back into the detent as shown below.
b) Check if MP pick up/ reverse/ forward rollers are assembled correctly.
c) If the MP pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective
roller(JC93–00540A).
(Refer to 3.2.5. MP Pick up_Reverse_Forward roller)
3) If the problem persists, check if the MP solenoid operates correctly.
a) Enter SVC mode. Execute MP solenoid test.
(Diagnostics > Engine Diagnostics > Engine Test Routines > 101-0271)
b) If the MP solenoid operation is abnormal, check the harness connection of MP unit.
c) If the harness has no defects, replace the MP solenoid(JC33-00029B).
4-145
Copyright© 1995-2017 SAMSUNG. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents