3. Disassembly and Reassembly
3.3.5. HVPS board
1. Remove the left cover. (Refer to 3.3.1)
2. Remove the bracket [A] after removing 2 screws.
3. Remove 1 screw connecting the ground wire. Open the
harness saddle.
3-23
4. Unplug all connectors on the HVPS board. Take out the
HVPS board holder.
NOTE
If you remove the LSU, you can unplug the connector
easily.
5. Release the HVPS board after removing 1 screw.
Copyright© 1995-2017 SAMSUNG. All rights reserved.