Checking That Your Oven Is Operating Correctly; Setting The Time - Samsung MC32A7056 Series User Manual

Checking that your oven is operating correctly

The following simple procedure enables you to check that your oven is
working correctly at all times. If you are in doubt, refer to the section entitled
"Troubleshooting" on the page 120-123.
NOTE
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum (100 % - 900 W)
is used, the water takes longer to boil.
Open the oven door by pulling the handle on the upper side of the door.
Place a glass of water on the turntable. Close the door.
MC32A7056CB_TL_DE68-04545F-00_EN_Revise.indd 13 MC32A7056CB_TL_DE68-04545F-00_EN_Revise.indd 13
Press the Microwave mode and set the
time to 4 or 5 minutes by pressing the
START/+30s button.
Result: The oven heats the water for 4 or
5 minutes. The water should then
be boiling.

Setting the time

When power is supplied, "88:88" and then "12:00" is automatically displayed on
the display.
Please set the current time. The time can be displayed in either the 24-hour or 12-
hour notation. You must set the clock:
• When you first install your microwave oven
• After a power failure
NOTE
Do not forget to reset the clock when you switch to and from summer and winter
time.
1. Press the Multi Function Selector Dial.
2. Turn the Multi Function Selector Dial to
1
2 5
3. Press the Multi Function Selector Dial to
3 6
4 7
4. Turn the Multi Function Selector Dial to
5. Press the Multi Function Selector Dial.
6. Turn the Multi Function Selector Dial to
7. When the right time is displayed, press
set time display type. (12H or 24H)
complete the setup.
set the hour.
set the minute.
the Multi Function Selector Dial to start
the clock.
Result: The time is displayed whenever
you are not using the microwave
oven.
English 13
2/25/2022 12:19:36 PM 2/25/2022 12:19:36 PM