Table of Contents
Advertisement
3
4
102 English
MC32A7056CB_TL_DE68-04545F-00_EN_Revise.indd 102
MC32A7056CB_TL_DE68-04545F-00_EN_Revise.indd 102
3. Make the display indicating Cb-2
(Microwave + hotblast) by turning the
Multi Function Selector Dial, and then
press the Multi Function Selector Dial.
Result: The following indications are
displayed:
(Microwave & Hot
blast combi mode)
600 W
(Output power)
4. Select the appropriate power level by
turning the Multi Function Selector Dial
until the corresponding output power is
displayed (600, 450, 300, 180, 100 W).
At that time, press the Multi Function
Selector Dial to set the power level.
• If don't set the power level within
5 seconds, Automatically changes to
the cooking time setting stage. (Default
: 600 W)
Result: The following indications are
displayed:
(Microwave & Hot
blast combi mode)
180 °C
(Temperature)
5. Select the appropriate temperature by
turning the Multi Function Selector Dial
(Temperature : 200 ~ 40 °C). At that time,
press the Multi Function Selector Dial to
5
set the power level.
6
• If don't set the temperature within
5 seconds, Automatically changes to
the cooking time setting stage. (Default
: 180 °C)
6. Set the cooking time by turning the Multi
7
Function Selector Dial.
• The maximum cooking time is
60 minutes.
7. Press the START/+30s button.
Result: Combination cooking starts.
The oven is heated to the
required temperature and then
microwave cooking continues
until the cooking time is over.
When it has finished.
1) The oven beeps 4 times.
2) The end reminder signal will beep
3 times (once every minute).
3) The current time is displayed again.
2/25/2022 12:19:52 PM
2/25/2022 12:19:52 PM
Advertisement
Table of Contents
