Kyocera KM-6330 Operation Manual page 88

Section 5 OTHER CONVENIENT FUNCTIONS
9 Once the test copy set is complete, a screen will be
displayed in order to verify whether or not you want to make
the initially designated number of copy sets at the present
settings, and the copier will enter a waiting-to-copy state.
Check the test copies.
Inch specifications
Check proof copy.
When stopping and retr y press "Cancel" key.
When continue to pr int, press "Star t" key.
Or ig. page
11x8 1 / "
100%
2
1 sided APS
Rear
Job130
Metric specifications
Check test copy.
To stop and retr y , press "Cancel" key.
To continue to pr int, press "Star t" key.
O r i g i n a l
A4
100%
1-sided APS
Rtop/Rear
JOB130
● If there is no problem with the copies...
Press the [Start] key and copying of the initially designated
number of copy sets will start.
If you want to change the number of copies to be made,
press the [Change Preset] key and enter the actual number
of copies you do want to make.
● If there is some problem with the copies...
Touch the "Cancel" key to cancel the copy job and start the
procedure from the beginning.
5-42
Count/Set Output
11x8 / "
1
2
2 sided
Cancel
Sort/Staple/Punch
Change
Preset
Count / set Output
A4
2-sided Cancel
Sort/Staple/Punch
Change
Preset