Changing Copy Limits - Kyocera KM-6330 Operation Manual

● Changing copy limits
Perform this procedure to change the copy limit registered for each
department ID-code without having to delete or re-register the
corresponding code.
1 Display the "Management code menu" screen.
(See "(2) Accessing the copy management mode settings"
on page 7-3.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2 Touch the "# of copy correct" key. The "Amend the number of
copy" screen will be displayed.
Inch specifications
Management menu
Management code menu
Counter Print
by ID-code the list
Print
Err. PRT.
Default setting
Metric specifications
Management mode
Management code menu
Counter
Print
by ID-code
the list
Print
Err. PRT.
Default setting
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
report
Week
Language Management
timer
Bypass
Hard Disk
setting
Management
Print
report
c o py P r i n t e r
ID-code
Reg./Del.
# of copy
correct Off
Off
Counter
On
On
clear
C o py P r i n t e r
ID-code
Reg./Del.
# of copy
correct
Off Off
counter
On
On
clear
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Select the department ID-code that you want to change the
copy limit for and then touch the "correction" key.
The screen to correct the copy limit will be displayed.
Inch specifications
Management menu
Amend the number of copy
Default setting - Management code menu
End
Metric specifications
Management mode
Amend the number of copy
Default setting - Management code menu
End
4 Use the keypad to enter the new copy limit for that
department ID-code.
The copy limit can be set to any 1 page increment between 1
and 999,999.
Inch specifications
Management menu
Amend the number of copy
Close
Default setting - Management code menu - Amend the number of copy
Metric specifications
Management mode
Amend the number of copy
Close
Default setting - Management code menu - Amend the number of copy
NOTES
• A setting of "0" will enable unlimited copying under that department
ID-code.
• If you want to clear the registered copy limit and enter a new limit,
touch the "Back" key to return to the screen in step 3.
• If you want to change the copy limit for another department ID-code,
repeat steps 2 through 4.
I D - c o d e N u m b e r o f c o py
Correction
I D - c o d e N u m b e r o f c o py
Correction
I D - c o d e
N u m b e r o f c o py
I D - c o d e
N u m b e r o f c o py
Close
Up
Down
Close
Up
Down
Back Close
# keys
Back Close
#-Keys
7-7