Kyocera KM-6330 Operation Manual page 22

Section 3 PREPARATIONS
(2) Loading paper into drawer[cassette] No.1
Up to 3000 sheets of standard copy paper (75 g/m
color paper (1500 sheets side-by-side) can be loaded into
drawer[cassette] No.1.
IMPORTANT!
The type of paper loaded in each drawer[cassette] must be specified
under "Paper type (drawer[cassette] No.1 - No.4)" on page 7-24.
1 Pull the drawer[cassette] that you want to load paper into out
toward you as far as it will go.
* DO NOT pull out more than one drawer[cassette] at a time.
2 Set paper in both sides of the drawer[cassette].
3-2
IMPORTANT!
• Make sure there are no folds, etc., in the paper you load into the
2 – 80 g/m 2 ) or
drawer[cassette]. Folds, etc., can cause paper jams.
• DO NOT load more paper than is indicated by the sticker located on
the inside of the drawer[cassette] (shown as 1 in the illustration).
• When you are loading paper into the drawer[cassette], make sure
that the side that was facing upward when you opened the package
is still facing upward.
NOTE
When you load paper into the drawer[cassette], the side facing
downward is the side that will be copied.
NOTE
If you will not be using the copier for a prolonged period of time,
remove all paper from the drawers[cassettes] and seal it in its original
packaging in order to protect it against moisture.
3 Gently push the drawer[cassette] back in.
1