Kyocera KM-6330 Operation Manual page 68

Section 5 OTHER CONVENIENT FUNCTIONS
7 If the optional Document Finisher is installed on your copier,
the "Saddle Stitch" ["Center Staple"] key will be displayed
and you will be able to select center stapling.
If the optional Center-Folding Unit is installed as well, you will
be able to center fold those stapled sets.
In this case, if you DO want the center stapling operation, or
the center stapling and folding operation, to be performed,
touch the "Saddle Stitch" ["Center Staple"] key and go to the
next step.
If you do NOT want either operation to be performed, go
directly to step 9.
Inch specifications
2 sided mode.
Booklet
Original
None 1-sided
2-sided
Booklet
Left/Right
Book 2-sided
➔Booklet
Top/Bottom
Metric specifications
Duplex Mode.
Booklet
Or iginal
None 1-sided
2-sided
Booklet
Left/Right
2-sided
Book
Top/Bottom
RBooklet
8
Touch the "Saddle stitch" key or the "Bind & Fold" key, as
appropriate.
* It is possible for you to center staple, or center staple and
fold, up to 16 copy sheets (64 layout pages) at one time.
Inch specifications
Set first page.
Press "Start" key.
Saddle Stitch
Off
Saddle
stitch
Bind &
Fold
Metric specifications
Duplex Mode.
Saddle Stitch
Off
Saddle
Stitch
Bind
& Fold
NOTE
The "Bind & Fold" key will only be displayed when the optional
Center-Folding Unit is installed on your copier.
5-23-1
Paper size
11x8 1 /
2
Register Back
Finishing Stitching Check direction
Check direction of
Off original top side.
Open from Stitching
Front cvr
left
Open from
right
Open from Saddle
Rear
top
Stitch
Paper size
Register Back
Finished Stitching Check direction
Check direction of
or iginal.
Off
Stitching
Left
Front cov.
binding
Right
binding
Top Center
Back Edge
Staple
binding
Pape
8 1 / x11"
2
100%
Back
Paper size
Back
9 If you want to add covers, touch the "Stitching Front cvr"
["Stitching Front cov."] key and go to the next step.
If you do NOT want to add covers, go directly to step 11.
Inch specifications
2 sided mode.
Booklet
None
Booklet
Book
➔Booklet
Metric specifications
Set
"
Duplex Mode.
Close
Booklet
None
Left top
Booklet
corner
Book
RBooklet
Set
10 Touch the "Cover" key and select whether or not (and where)
to copy on each of the front and back covers.
Close
Inch specifications
2 sided mode.
Left top
Front cover
corner
No cover
Cover
Metric specifications
Set
Duplex Mode.
Close
Stitching Front cover.
No cover
Cover
Set
Close
Register
Original Finishing Stitching
Off
Open from Stitching
1-sided
left Front cvr
2-sided Open from
Left/Right right
2-sided Open from
Saddle
Top/Bottom top Stitch
Register
O r i g i n a l F i n i s h e d S t i t c h i n g
O f f
Stitching
Left
1-sided
Front cov.
binding
2-sided
Right
Left/Right
binding
2-sided Center
Top
Top/Bottom binding Staple
Front cover Rear cover
Back copy Back copy
Blank Blank
2 sided 2 sided
Front copy Front copy
copy copy
Back cover
Front cover
Blank Back copy Blank Back copy
2-sided 2-sided
Front copy Front copy
copy copy
Paper size Set
11x8 1 / "
2
Back Close
Check direction
Check direction of
original top side.
Left top
Rear
corner
Paper size
Set
Back Close
C h e ck d i r e c t i o n
C h e ck d i r e c t i o n o f
o r i g i n a l .
Left top
Back Edge
corner
Paper size Set
11x8 / "
1
2
Back Close
Paper size Set
Back Close