Kyocera KM-6330 Operation Manual page 160

Section 7 COPIER MANAGEMENT FUNCTIONS
Default setting
Copy eject location Sets the location for the ejection of finished copies.
* This setting will only be displayed when the optional
Touch panel sound ON/ Sets whether or not the touch panel will emit a "beep"
OFF sound each time a key is touched.
Silent mode ON/OFF The copier can be switched to a silent mode, which
shortens the length of time that the laser data writing
motor continues to spin after each copy job is finished.
Turn the silent mode ON if the noise of the motor
bothers you in any way.
Day & time Sets the current date and time.
Time difference Sets a designated time difference.
Changing the Changes the management code that is used by the copy
management code manager.
IMPORTANT:
If you change the management code from its factory
default, be sure to keep some sort of record of the new
management code. If, for any reason, you forget the
registered management code, you will need to contact
your service representative.
Auto shut-off ON/OFF Sets whether or not to have the auto shut-off function
automatically turn the main switch OFF a certain amount
of time after copying, or if no operation has been
performed on the copier during that time.
* If auto shut-off interferes with your copying operations,
7-20
Description
Document Finisher or Multi Job Tray is installed on
your copier.
turn this function OFF. However, it is recommended
that you try to set a longer time interval until auto shut-
off engages before you actually turn it OFF.
Available Factory
settings setting
Tray A Tray A
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
On / Off On
On / Off Off
Year: 2000-2099 Year: '00
Month: 1 – 12 Month: 01
Day: 1 – 31 Day: 01
Time: 00:00 – 23:59 Time: 00:00
+12:00 – -12:00 00:00
0000 – 9999 63 cpm copiers
: 6300
75 cpm copiers
: 7500
On / Off On
Reference
page
7-29
7-30
7-31
7-32
7-33
7-34
7-35