Kyocera KM-6330 Operation Manual page 163

● Paper size (drawer[cassette] No.2 & No.3)
Perform the following procedure to set the size of paper that is loaded
in drawer[cassette] No.2 and No.3.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2 Select one of the "Paper size" settings
("2nd drawer[cassette]" or "3rd drawer[cassette]") in the
settings list on the left side of the touch panel and then
touch the "Change #" key.
The screen to set the paper size for that drawer[cassette] will
be displayed.
Inch specifications
Default setting
Machine default
Default menu
Auto drawer switching
Paper size(2nd drawer)
Paper size(3rd drawer)
Paper type(1st drawer)
Paper type(2nd drawer)
Default setting
Metric specifications
Default setting
Machine default
Default menu
Auto cassette switching
Paper size (2nd cassette)
Paper size (3rd cassette)
Paper type (1st cassette)
Paper type (2nd cassette)
Default setting
Language Management
Bypass BOX
setting Management
Print
report
Language Management
Bypass Hard Disk
setting
Management
Print
report
Setting mode
On / All types of paper
Auto / Inch
Auto / Inch
Plain
Plain
Change #
Setting mode
On / All types of paper
A4
A4
Plain
Change #
Plain
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Perform the step that corresponds to the specification of your
copier:
<Inch specification copiers>
If you select "Auto Detecton" (automatic size detection) here,
select the desired unit of measure ("Centimeter" or "Inch") as
well.
If you select "Standard sizes" (standard paper size) here,
simply touch the key that corresponds to the size of paper
that is loaded in that drawer[cassette].
Paper type(2nd drawer)
End
Auto
Weekly
Detection
timer
Standard
sizes
Default setting - Machine default
<Metric specification copiers>
Select the size of paper that is loaded in that
drawer[cassette].
End
Paper size (2nd cassette)
Week
timer
Auto
Standard sizes
Default setting - Machine default
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
Close
screen in step 2.
Up
Down
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Select paper size.
11x17"
A3 B4
A4 B5 8 1 / x14"
2
11x8 1
A4 B5
8 1 / x11"
A5 Folio
2
Select paper size.
A3 B4 11x17"
A4 1
B5 8 / x14"
2
A4 B5 11x8 1
A5 Folio 8 1 / x11"
2
Back Close
5 1 / x8 1 / "
2 2
8 1 / x13"
2
/ "
2
Back
Close
5 1 / x8 1 / "
2 2
1
8 / x13"
2
/ "
2
7-23