Kyocera KM-6330 Operation Manual page 115

# Selecting the margin mode or the centering/image shift mode
This procedure selects the margin mode or the centering/image shift
mode in order to create a margin space or center the copy image.
-
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Margin/Centering" ["Margin/Imag. shift"] key. The "Margin/
Centering" ["Margin/Imag. shift"] screen will be displayed.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Job Build - Step1
Off Auto
Border Select
Erase orig.size
None None
Margin/
Page #
Centering
Basic Quality
Metric specifications
Ready to Job build.
Set original. Press Start key.
Job Build - Step1
Off Auto
Erase Select
size orig.
Mode
None None
Margin/ Page
numbering
Imag.shift
Basic Quality
NOTE
The setting in regard to the margin mode or the centering/image shift
mode can only be made in the first step of the job build mode and will
apply to all steps in the copy job.
2 Touch the "Margin" key or the "Centering" ["Imag.shift"] key,
as appropriate.
For more detailed information on these two settings, refer to
the explanation for the margin mode on page 5-6 or the
centering/image shift mode on page 5-8, as appropriate.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Margin/Centering
None
Margin
Centering
Metric specifications
Ready to Job build.
Set original. Press Start key.
Margin/Image shift
None
Margin
Image
shift
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
Off
Insert page
Modify
Copy
2 sided copy-Left
Print from
Tray A
Finished page # : 0 Rear page
Select of
Output
Edit
None
Insert
blank page
Modify
copy
2-sided Copy-Left
Print from
Tray A
Finished page #: 0 Rear page
Select of
Output
Edit
Back
Reposition image to left/right or
top/bottom, and also center image
on paper.
Back
Reposition image to left/right or
top/bottom and center image on paper.
Section 5 OTHER CONVENIENT FUNCTIONS
$ Selecting the print page numbers mode
This procedure selects the print page numbers mode in order to have
page numbers printed on the corresponding copies.
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Page #" ["Page numbering"] key. The "Page #" ["Page
numbering"] screen will be displayed.
Inch specifications
Set
Ready to Job build.
Place originals then press Start key.
End Job Build - Step1
Off
Border
Erase
None
Margin/
Centering
Basic
Metric specifications
Set
Ready to Job build.
Set original. Press Start key.
End Job Build - Step1
Off
Erase
Mode
None
Margin/
Imag.shift
Basic
NOTE
The setting in regard to the print page numbers mode can only be
made in the first step of the job build mode and will apply to all steps
in the copy job.
2 For more detailed information on this setting, refer to the
explanation for the print page numbers mode on page 5-16.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Page #
Set
None
Close
-1-
Metric specifications
Ready to Job build.
Set original. Press Start key.
Page numbering
Set
None
Close
-1-
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
Auto Off
Select Modify
orig.size Copy
2 sided copy-Left
Tray A
None
Finished page # : 0
Select of
Page #
Output
Quality Edit
Auto None
Select Modify
size orig. copy
2-sided Copy-Left
None Tray A
Finished page #: 0
Page Select of
numbering
Output
Quality Edit
P.1
Page # can be added on bottom of copy.
1/n
P.1
Page # can be added on bottom of copy.
1/n
Set
End
Insert page
Print from
Rear page
Set
End
Insert
blank page
Print from
Rear page
Set
Back Close
Set
Back Close
5-69