Paper Jam In The Paper Output Slot - Kyocera KM-2050 Basic Operation Manual

2 Remove any jammed paper without tearing it.
(25 ppm model only)
If paper is left between the drum cover A and the drum
as shown in the illustration, remove the paper from the
lower side (in the direction indicated by the arrow).
Note that if you try to remove the paper by force from
the upper side of the drum cover A, the drum cover A
may be damaged.
Note
If the paper does happen to tear, remove any loose scraps from inside the machine.
3 If the optional duplex unit is installed, raise the duplex
unit and remove any paper.
Note
If the paper does happen to tear, remove any loose scraps from inside the machine.
4 Close the left cover.

Paper Jam in the Paper Output Slot

If Paper misfeed in Eject section Remove
paper appears and the jam location indicator shown in
the illustration blinks, a paper jam has occurred in the
paper output slot. Perform the following procedure to
remove the jammed paper.
Important!
The drum section inside the main body is sensitive to scratches and contaminants. When removing
paper, be careful not to touch it or scratch it with your watch, ring, etc.
Paper misfeed in
Eject section
Remove paper.
JAM50
Troubleshooting
A
6-13