Registering The Default Gateway - Kyocera KM-2050 Basic Operation Manual

Preparations
4 Press the Enter key.
Next, set the default gateway.

Registering the Default Gateway

To register the default gateway, continue the procedure from step 4 above.
1 Press the
2 Press the Enter key.
3 Use the same procedure as steps 14 to 17 of IP
address setting to input the address.
4 Press the Enter key.
5 When you finish making all of the network setting,
press the Reset key. The message display returns to
the printer basic screen.
2-18
key or the key to select Gateway.
TCP/IP Setting
IP Address
Subnet Mask
Gateway
Gateway
0 . 0 . 0 . 0