Operation Panel - Kyocera KM-2050 Basic Operation Manual

Names of Parts

Operation Panel

1 2 3
5 4
1
2
3
4
5
6
7
8
9
10 Function key — Press this key to set the orientation of the originals or perform continuous
11 Scanner Function key — Press this key to adjust various scanner settings. For the scanner
12 Auto Selection key and indicator — Press this key when using the auto selection mode. The
1-4
7 6 11 12 13
8 9 10 15 16 14
System Menu/Counter key and indicator — Press this key to set the job accounting function,
adjust the default settings or set the machine. (For details, refer to Chapter 3 and Chapter 4 in
Advanced Operation Guide.)
Copier key and indicator — Press this key when using the copier functions of this machine.
The Copier indicator will light up when the machine is in the copier mode.
Printer key and indicator — Press this key when using the printer functions of this machine.
The Printer indicator will light up when the machine is in the printer mode.
Scanner key and indicator — Press this key when using the scanner functions of this
machine. The Scanner indicator will light up when the machine is in the scanner mode. For the
scanner functions, the optional network scanner kit must be installed.
Fax key and indicator — Press this key when using the fax functions of this machine. The Fax
indicator will light up when the machine is in the fax mode. For the fax functions, the optional
fax kit must be installed.
Combine key and indicator — Press this key to use the combine copy function. The
Combine indicator will light up. (See page 3-17.)
Border Erase key and indicator — Press this key to use the border erase function. The
Border Erase indicator will light up. (For details, refer to Chapter 1 in Advanced Operation
Guide, Border Erase Mode.)
Duplex/Split Page key and indicator — Press this key to perform duplex copying or use the
split page function. The Duplex/Split Page indicator will light up. For duplex copying, the
optional duplex unit must be installed. (See page 3-9 and 3-12.)
Offset key and indicator — Press this key to perform offset copying. The Offset indicator will
light up. (For details, refer to Chapter 1 in Advanced Operation Guide, Offset Copying.)
scanning copying, auto rotation copying or EcoPrint mode. (For details, refer to Chapter 1 in
Advanced Operation Guide.)
functions, the optional network scanner kit must be installed.
Auto Selection indicator will light up. For the auto selection mode, the optional document
processor must be installed. (For details, refer to Chapter 1 in Advanced Operation Guide,
Auto Selection Mode.)
25
Ready to copy.
Auto Auto
100%
17 18 19 20
22 23
28 27 26 29 30
21
1
33
24
31 32
37
34 36 35