Kyocera KM-2050 Basic Operation Manual page 120

Troubleshooting
1 If jammed paper is seen through the paper output slot,
pull it out to remove it.
Note
If the paper does happen to tear, remove any loose scraps from inside the machine.
2 Pull the left cover handle up to open the left cover.
3 Remove any jammed paper without tearing it.
Note
If the paper does happen to tear, remove any loose scraps from inside the machine.
4 Close the left cover.
Paper Jam in the Optional Document Processor
If Misfeed in DP. Remove original(s) appears
and the jam location indicator shown in the illustration
blinks, a paper jam has occurred in the optional
document processor. Perform the following procedure
to remove the jammed original(s).
6-14
Misfeed in DP.
Remove original(s)
JAM70