2
Press the Duplex/Split Page key.
3
Press the
key or the
copy mode from 2 sided->1 sided
[2-sided->1-sided] and Book->1-sided.
4
Press the Enter key.
If you have selected 2 sided->1 sided
[2-sided->1-sided], proceed to the next step.
If you have selected Book->1-sided, proceed to step
7.
5
Press the
key or the
stitch side.
6
Press the Enter key.
7
Press the Start key. Scanning of the original starts.
If the originals have been set in the optional document
processor, copying starts automatically.
If the original has been set on the platen, a message
prompting replacement of the original is displayed. In
this case, proceed to the next step.
8
Replace the original and press the Start key. Scanning of the original starts.
key to select the desired split
key to select the original
Duplex/Split Page:
Book
2-sided
2 sided
1 sided
Book
1-sided
Original stitch side:
Left side
Top side
Basic Operation
3-13