Device Options; Setting Device Options; Setting Punch Options; Setting Up Custom Boxes - Kyocera TASKalfa 552ci User Manual

Device Options

Setting Device Options

1
2

Setting Punch Options

1
2
3

Setting up Custom Boxes

1
2
3
KX DRIVER
Optional devices extend the capabilities of your printing system for source,
finishing, and job storage.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
You can set the printer driver to match the optional devices installed on your
printing system.
In the Properties dialog box, click Device Settings.
In Device Settings > Device options, select the check boxes for all installed
devices.
Before using the Punch option in the Finishing tab, you must set punch options
in Device Settings. The selected option is available under Punch in the
Finishing tab.
In Device Settings, under Device options, select 3000–sheet finisher. Or if
already selected, double-click the blue text.
Depending on the punch unit attached, select one option:
None
No punch option available in the Finishing tab.
2 hole
2 hole option available in the Finishing tab.
2 & 3 hole
2 hole and 3 hole options available in the Finishing tab (inches based).
2 & 4 hole
2 hole and 4 hole options available in the Finishing tab (metric based).
Click OK.
You can create up to 1000 custom boxes for storing print jobs. Custom boxes
can be assigned to users who can print the jobs later from the printing system's
operation panel.
In Device Settings, select Hard disk. Or if selected, double-click Hard disk.
In the Hard Disk Settings dialog box, click Add.
A new Box number and Box name appear in the Defined custom boxes list.
In the Defined custom boxes list, a new Box number and Box name appear.
If desired, change the number and name in the Box number and Box name
Device Settings
2-2