A Tour Of Effects Mode; Load The Tutorial Files; A Simple Studio - Kurzweil K2661 Musician's Manual

A Tour of Effects Mode

Let's take a tour through several studios. After you do this, you should have a pretty good idea
of what it's like to work with Effects mode.
Load the Tutorial files
From the CD-ROM or SmartMedia card that came with your K2661, load the file
KDFXTUTR.K26 into bank 200...299. You can use a different bank if you like, but then your
numbers and the ones in this chapter will be different.
1. Insert the disk into the drive
2. Press Disk to go into Disk mode
3. Set Current Disk to SMedia
4. Press Load
5. Cursor down to KDFXTUTR.K26 (or TUTOR1B.K25)
6. Press OK
7. In the "Load this file as:" dialog, select 200...299
8. Press OK
9. Press OverWrt (this will erase all objects in the 200s bank, so you should save anything
10. Press Exit to get back to Program mode.

A Simple Studio

Call up Program #199 on your K2661. In Program mode, either scroll the Alpha wheel to
Program 199 Default Program, or press 1-9-9-Enter on the Alphanumeric pad.
Now go into Effects mode by pressing the Effects button, and you'll see this page:
you want to keep before doing this; press Cancel if you want to save objects before
proceeding). If the 200s bank is empty, then OverWrt will not be displayed as an option; in
this case, you should select Append.
Basic Effects Mode
A Tour of Effects Mode
9-21