Continuous Controllers - Kurzweil K2661 Musician's Manual

Setup Mode and the Setup Editor
Controllers
To get an idea of the expressive capabilities of Setup mode, explore the factory setups that come
with the K2661.
The K2661's physical controllers include the following:
• The eight sliders (A, B, C, D, E, F, G, H) in the Assignable Controllers section
• The two Continuous Control Pedal jacks (CCPedal 1 and CC Pedal 2)
• The Large Ribbon, which you can define as a one- or three-section controller
• The Pitch Wheel
• The Modulation Wheel (Mod Wheel)
• Keyboard aftertouch, or Mono Pressure (MPress)
• The Breath Controller jack (which is connected to Continuous Controller Pedal 2)
• The two Panel Switches, located above the Pitch and Mod Wheels
• The four Footswitch pedal jacks (1, 2, 3, and 4)
The following tables and illustration provide an overview of the physical controllers and their
parameters.

Continuous Controllers

Physical Controller
Sliders A, B, C, D, E, F, G, H
CPedals 1 & 2 / Breath
Large Ribbon
Pitch Wheel and Mod Wheel
MPressure
Table 7-3
7-20
Setup Editor
Page
SLID, SLID/2
CPEDAL
RIBBON
WHEEL
PRESS
Continuous Controllers
Parameter:Values
Destination: MIDI Control Source list
Scale: -300% to 300%
Add: -128 to 127
Curve: Linear, Expand, Compress, Crossfade,
Bump, Reverse Linear, Reverse Expand, Reverse
Compress, Reverse Crossfade, Reverse Bump
Entry Value: None, 0 - 127
Exit Value: None, 0 - 127
(same as Sliders)
(same as Sliders)
(same as Sliders)
(same as Sliders)