More Load Function Features - Kurzweil K2661 Musician's Manual

Disk Mode
Load Function Dialog
Aborting a multiple file load is done by pressing and holding down either of the Plus (+) or the
Minus (-) buttons that are located just below the Alpha wheel. This should be done at least one-
half second before you anticipate the current file to finish loading, or else the K2661 will not
sense that you wish to abort the load.
You will see the following question after the current file being loaded is completed:
It may be a good idea to practice using this method of aborting a multiple file load, so that when
the time comes that you accidentally select 100 files, you will remember how to abort the
process. This same method (of holding the Plus or Minus buttons down) is also used to abort
the Backup feature and the macro file load feature.
If you run out of object or sample RAM, you will have one opportunity to abort the load as
explained above. However, if you continue from that point you may end up seeing the same
error message "Memory is full" for each file that you had selected. This can be a rather tedious
process, however it is still possible to abort out of this by holding down the Plus or Minus
button simultaneously while pressing Yes when you see the following question:

More Load Function Features

There are more features having to do with the Load function that are described later on in this
chapter, such as loading macro files and loading AIFF files.
13-23