The Kdfx And Fxmod Pages; The Common Page; Song - Kurzweil K2661 Musician's Manual

Parameter
Switch Type
Destination
On
Off
Entry Value
Exit Value

The KDFX and FXMOD Pages

These are the same seven effects-control pages that we discussed in Chapter 6 (beginning on
page 6-44). They enable you to define the studio and FXMods for all zones in the setup. As long
as the FX Mode parameter is set to Auto or Setup, the values you set on these pages apply to all
zones in the setup. If FX Mode is Master, all programs and setups use the studio specified on the
Effects-mode page.

The COMMON Page

The COMMON page determines what song, if any, becomes current when you select a setup,
and how song playback is synchronized. It also sets the operational mode for the buttons above
the programmable sliders.
Parameter

Song

SngCtl
Sync:
Mutes
Song
You can link a song to the current setup, using the Song parameter. Select any existing song (or
0 None if you don't want a song associated with the setup). The song 1 New Song is a blank
template that contains no notes (unless you've saved 1 New Song without renaming it).
Range of Values
Momentary, Toggle, Note Momentary,
Note Toggle
MIDI Control Source list or C –1 to G9
0–127
0–127
None, 0–127
None, 0–127
Range of Values
List of existing songs
Song, Setup
Off, On
Zone Mutes, KB3 Control
Setup Mode and the Setup Editor
The KDFX and FXMOD Pages
Default
PSw1: Toggle
PSw2: Toggle
PSw1: ArpSw
PSw2: MIDI 29
127
0
PSw1: None
PSw2: Off
Off
Default
0 None
Setup
Off
Zone Mutes
7-33