The Setup Editor - Kurzweil K2661 Musician's Manual

Table 7-2 gives you a quick visual reminder of how zones behave depending on their status.
Red
Green (no others are red)
Green (another is red)
Orange
(Off)
Table 7-2
Remember that any changes you make to zone status in Setup mode are temporary; as soon as
you select another setup, that setup's programmed zone status takes over. To change a setup's
zone status permanently, use the Setup Editor (see Status on page 7-8).

The Setup Editor

From Setup mode, press the Edit button to enter the Setup Editor, where you can make changes
to the currently selected setup. Use the soft buttons to select the various Setup-editor pages. The
upper line of each page displays the usual mode reminder, as well as the current Setup-editor
page, and the current zone. Use the Chan/Bank buttons to select one of up to eight different
zones, each having its own set of Setup-editor pages.
The parameters on the Setup-editor pages define what each of a setup's zones sends—both to
internal programs and to the MIDI Out port. They also determine how the K2661 responds to
MIDI signals received from a MIDI controller connected to the K2661's MIDI In port (when the
Local Keyboard Channel matches the transmit channel of your MIDI controller).
The display diagrams you see in this chapter show the default values for setup 97 ControlSetup.
Zone
LED Color
Status
Soloed
Active
Backgrounded
Muted
Empty
Zone Status in Setup Mode
Setup Mode and the Setup Editor
Data Generated by Zone
Notes Controllers
✔ ✔
✔ ✔
The Setup Editor
Program Entry and
Number Exit Values
✔ ✔
✔ ✔
✔ ✔
✔ ✔
7-5