Kurzweil K2661 Musician's Manual page 205

FXBus 3
Press Edit, then use the Chan/Bank buttons to select FXBus 3. Here's where our breathy flute
sound is, and it's going through a delay FXPreset called 207*Adj Delay.
qWWWWT
!k ©!!!!!!!!!!!!!!!!!!!!!!!!!!!h
CVVVVB
Press Edit to inside the FXPreset, and you'll see that the Feedback Level is under FXMod
control.
Press PARAM2, and on that page, you'll see that Delay Scale is also under FXMod control:
Go back out to the Setup (press Exit twice), press the FXMOD3 soft button, and look at the
FXMOD3 page.
On the FXMOD3 page, we see that the Delay Scale, which scales all of the various delays in the
Algorithm, is controlled by the Foot Pedal, MIDI controller 4—Control Pedal 1 for K2661
keyboard users. The delay is nominally a 480 ms loop, with four equal-spaced taps inside it, 120
ms apart. With the Foot Pedal, we can scale all those times by a factor of between 0.54 and 6.00.
Finally, the Aux Level from this bus, controlling another reverb send, is once again assigned to
MIDI controller 27, Slider G.
Basic Effects Mode
A Complex Studio with Real-Time Control
9-37