Find Files - Kurzweil K2661 Musician's Manual

Disk Mode
Disk Utilities
If you change partitions while the free-space information is visible, the K2661 automatically
calculates and displays the free-space information for the new partition. Exiting the DiskUtil
page disables this automatic updating until the next time you use the Free utility.
List
Lists an expanded directory tree from any level of the hierarchy, showing the current directory's
contents, and the contents of all of the current directory's subdirectories. This function can be
used to determine the total size of files within any tree of subdirectory. It is also helpful for
finding files on the disk.
The List utility is a convenient way to view the directories and files on your hard disk. It's also a
time saver for disk operations. When you press List, the display shows a hierarchical listing of
all the files and directories in the current partition (this can take a while, depending on the size
and complexity of your directories). Directory names are followed by a backslash ( ).
Use the Up and Down cursor buttons to select different objects in the list. The index number on
the far right of the display's top line shows where you are in the list (each object is numbered
according to its position in the directory hierarchy). Using the cursor buttons, you can quickly
find files on the hard disk without having to change directories.
Changing partitions while using the List utility resets the index number to 1. In other words, no
matter where you are in the list for the current partition, if you change partitions you'll start at
the first entry in that partition's list.
You can use the alphanumeric buttonpad to navigate through the list. Press the index number
you want to view, then press Enter.
Use the Up and Down soft buttons (not the cursor buttons) to navigate through the partition.
Pressing Down when a directory is highlighted takes you into that directory (pressing Down
when a file is highlighted doesn't do anything). Pressing Up always takes you to the parent
directory of the current directory (if you're at the partition's root directory, the K2661 prompts
you to select a partition.). As you've probably guessed, pressing Root takes to the root directory
of the current partition.
Press the Go To button to change the current path to the highlighted directory (or to the
directory that contains the highlighted file). You'll save a lot of time if you use the List utility to
navigate to the desired directory before executing a command (instead of executing the
command first, then navigating to the desired directory in the resulting dialog).
Done
Exits to the Disk-mode page.

Find Files

The Find files utility first prompts you to enter a character string to be searched for:
13-60