Kurzweil K2661 Musician's Manual page 146

Setup Mode and the Setup Editor
The SLIDER and SLID/2 Pages
Take a look at the parameters. Since all the continuous controllers work in a similar manner,
you'll find these same parameters on the CPEDAL, RIBBON, WHEEL, and PRESS pages.
Destination (Slider A)
Destination (Slider B)
Destination (Slider C)
Destination (Slider D)
Destination (Slider E)
Destination (Slider F)
Destination (Slider G)
Destination (Slider H)
Scale
Add
Curve
Entry Value
Exit Value
NOTE: The FOOTSW page, and all the switch-controller pages, are described following the section
called Switch Controller Parameters, which begins on page 7-30.
7-26
Parameter
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
±300%
-128 to +127
Curve list (see text)
None, 0–127
None, 0–127
Range of Values Default
Data
MIDI 22
MIDI 23
MIDI 24
MIDI 25
MIDI 26
MIDI 27
MIDI 28
100%
0
Lin
None
None