Kurzweil K2661 Musician's Manual page 468

Advanced KDFX
Real-time Control of KDFX
value of the parameter when the studio is not under FXMod control, so don't get confused. If
you are in Program mode, and this is the current program, the Adjust value takes precedence
over the studio's fixed value, and it's the Adjust value that will be called up when you call up
the program.
Source
The Source parameter determines which real-time control—internal, MIDI, etc.—is going to
affect the selected studio parameter. As with all K2661 real-time controls, the range of control
sources is very large:
• OFF (the parameter is not affected by any source and stays at its Adjust value)
• ON (the parameter is set to the maximum value determined by adding the Adjust and
Depth values)
• MIDI Continuous Controllers 1-95 (see Note)
• Channel State
• Pressure
• Pitch Wheel
• The usual list of controllers, as described in Chapter 4 of the Musician's Reference: ASRs,
FUNctions, Clocks, LFOs, Internal Controls, Random Generators, etc.
Note: Under some circumstances, particularly when the K2661 is in Setup mode, there are certain
restrictions on which MIDI sources you can use.
Dedicated FXMod Control Sources
There are a few control sources that apply exclusively to FXMods:
• FXLFO1, FXLFO1ph, FXLFO2, and FXLFO2ph—two LFOs and their phases.
• FXASR1 and FXASR2— two three-stage (Attack/Sustain/Release) envelopes with
selectable triggers and Normal, Hold, and Repeat modes.
• FXFUN1, FXFUN2, FXFUN3, and FXFUN4—Functions. Yes, more Fun with KDFX!
The ASRs, FUNs, and LFOs work exactly the same way they do in any other part of a program,
except these are extra control sources for use only with FXMods, and are not available for other
program functions. They are global for all of KDFX—you can't apply these controls to just one
FXBus.
The parameter values for these controls are saved with the program. As we saw earlier, you get
to the pages for the FXMod control sources by pressing the more> soft button until you see these
soft buttons:
In the Program Editor, you can also get to these pages directly from the KDFX page or one of the
FXMOD pages: select one of those parameters as a source, and then press Edit.
15-24