Reset Channels (Rsetch); Panic - Kurzweil K2661 Musician's Manual

MIDI Mode
The Soft Buttons in MIDI Mode

Reset Channels (RsetCh)

When you press this soft button, the K2661 will ask you if you want to reset all channels, and a
pair of Yes/No soft buttons will appear. If you press the Yes soft button, all settings on the
CHANNELS page will return to their default values. For example, you may have set several
MIDI channels to route their audio to Output Group B for a special project. When the project's
over, you can reset the Channels to restore the audio routing to each individual program (a
value of Prog), rather than selecting each channel's page and setting the Pair parameter back to
a value of Prog. Press the No soft button if you decide not to reset the channels.

Panic

This soft button sends an All Notes Off and All Controllers Off message both to the K2661 and
over all MIDI channels.
10-18