Table of Contents
Advertisement
◆
Component Names and Functions
No.
Name
Illuminates to show that the drive is operating the motor.
The LED turns OFF when the drive stops.
Flashes to show that:
• The drive is decelerating to stop.
• The drive received a Run command but the frequency reference is 0 Hz.
RUN LED
Flashes quickly to show that:
A
• The drive received a Run command from the MFDI terminals when the drive is not in Drive Mode.
• The drive received a Fast Stop command.
• The safety function shuts off the drive output.
• The user pushed
• The drive is energized with an active Run command and b1-17 = 0 [Run Command at Power Up =
Illuminates when the drive detects a fault.
Flashes when the drive detects:
ALM LED
• Alarm
B
• An oPE parameter setting error
• A fault or alarm during Auto-Tuning
The light switches off when the drive is in normal operation. There is no fault or alarm.
microSD Card
The insertion point for a microSD card.
C
Insertion Slot
Function Keys
The menu shown on the keypad sets the functions for function keys.
(F1, F2, F3)
The name of each function is in the lower half of the display window.
D
YASKAWA ELECTRIC SIEP C710617 19A YASKAWA AC Drive CR700 Technical Manual
Figure 3.1 Keypad
Table 3.1 Component Names and Functions
on the keypad while the drive is operating in REMOTE Mode.
Disregard Existing RUN Command].
3 Startup Procedure and Test Run
Function
117
Advertisement
Table of Contents
