Table of Contents
Advertisement
Crestron TPMC-4SMD-FD
Setup
Installation & Operations Guide – DOC. 7174F
Network Wiring
When wiring the Ethernet network, consider the following:
•
Use Crestron Certified Wire.
•
Use Crestron power supplies for Crestron equipment.
•
Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results or can
cause damage to the equipment. Please use the Crestron Power Calculator
to help calculate how much power is needed for the system
(www.crestron.com/calculators).
Unlike other Crestron network devices, the TPMC-4SMD-FD does not use the
Cresnet
network for communications between the device and the control system.
The TPMC-4SMD-FD requires the use of a high-speed Ethernet connection for
control system communications.
For general information on connecting Ethernet devices in a Crestron system, refer to
the latest version of the Crestron e-Control
6052) at www.crestron.com/manuals.
Identity Code
The IP ID is set within the TPMC-4SMD-FD's IP table using Crestron Toolbox™
software. For information on setting an IP table, refer to the Crestron Toolbox
software help file. The IP IDs of multiple TPMC-4SMD-FD devices in the same
system must be unique.
When setting the IP ID, consider the following:
•
The IP ID of each unit must match an IP ID specified in the Crestron
®
Studio
software or SIMPL Windows program.
•
Each device using IP to communicate with a control system must have a
unique IP ID.
4.3" Designer Touch Screen
Technology Reference Guide (Doc.
4.3" Designer Touch Screen: TPMC-4SMD-FD • 11
Advertisement
Table of Contents
