Advertisement
TS-770-GV and TS-1070-GV
7 in. and 10.1 in. Tabletop Touch Screens, Government Version
Access the Web Configuration Interface
The touch screen provides a web configuration interface that is used to
view and configure various touch screen settings and to select an
application. The interface can be accessed using the touch screen IP
address or the XiO Cloud® service.
Touch Screen IP Address
To access the web configuration interface using the touch screen IP
address:
1. Ensure that the touch screen is connected to the network.
2. Use the Device Discovery tool in Crestron Toolbox™ software to
discover the touch screen and its IP address on the network.
3. Enter the control system IP address into a web browser.
XiO Cloud Service
The XiO Cloud service allows supported Crestron devices across an
enterprise to be managed and configured from one central and secure
location in the cloud. Supported devices are configured to connect to the
service. Use of the service requires a registered XiO Cloud account.
NOTE: The device may be disconnected from the service by navigating to
the Cloud Services tab in Crestron Toolbox software (Functions >
Device Info > Cloud Services). For details, refer to the Crestron Toolbox
help file.
To access the web configuration interface using the XiO Cloud service:
1. Record the MAC address and serial number that are labeled on the
shipping box or rear panel of the device. The MAC address and serial
number are required to add the device to the service.
2. Do either of the following:
For existing accounts, access the XiO Cloud service at
l
https://portal.crestron.io.
For new accounts, register for a XiO Cloud account at
l
www.crestron.com/xio-cloud-registration.
3. Claim the device to the service as described in the
Guide (Doc.
8214).
4. Select the device from the cloud interface to view its settings.
Set the Time Zone
The time zone must be set on the touch screen if it will not be paired with
a control system IP table.
To set the time zone:
1. Access the web configuration interface using either the touch screen
IP address or the XiO Cloud service.
2. Select the Settings tab.
3. Navigate to System Setup > Time/Date.
4. Select the time zone where the touch screen will be used from the Time
Zone drop-down menu.
5. Click Save Changes on the top right of the screen.
Quick Start
XiO Cloud User
4
Advertisement
