Supplied Hardware; Installation - Crestron FlipTop FT-TS600 Operations & Installation Manual

Fliptop touch screen
Hide thumbs Also See for FlipTop FT-TS600:
Table of Contents

Advertisement

FlipTop Touch Screen
24 • FlipTop Touch Screen: FT-TS600

Supplied Hardware

The hardware supplied with the FT-TS600 is listed in the following table.
Supplied Hardware for the FT-TS600
DESCRIPTION
Metal, Plate, Mounting
Screw, 10-32 x 2", Steel, Socket HD, Zinc
Small Hole Plug
Large Hole Plug
Small Bushing, 5/16" ID, 0.5" OD
Large Bushing, 0.55" ID, 0.80" OD

Installation

NOTE: To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
Consideration must be given if installed in a closed assembly, inside a closed desk or
in a closed podium since the operating ambient temperature of these environments
may be greater than the room ambient temperature. Contact with thermal insulating
materials should be avoided on all sides of the unit.
Cable Management Plates
The FT-TS600 ships with two cable management plates pre-installed. These provide
a pullout cable solution for the AUD OUT (audio output) COMPUTER and LAN
cables. A 6 foot (1.8 meter) USB Type A to Type B cable is included for the
COMPUTER connection. Cables are looped through the cable management plates.
The included bushings must be installed before mounting the FT-TS600 in a surface.
For a neat appearance, any unused openings can be filled using the included hole
plugs. The only tool required is a Phillips screwdriver.
1.
Remove the two cable management plates and retain the 06-32 x 1/4" screw
that holds each one in place.
2.
Place the bushings on the cables (eight bushings supplied).
3.
Thread the cables through the appropriate slots on each plate.
4.
Snap the bushings into the plate slots.
5.
Feed all excess cable through the opening.
6.
Attach each plate by first sliding its dovetail into the slot toward the rear of
the inside of the FT-TS600, then dropping the front into place and securing
it with the 06-32 x 1/4" screw from step 1. Refer to the following
illustration.
Crestron FT-TS600
PART NUMBER
2036985
2037109
2036647
2036649
2009522
2010496
Operations & Installation Guide – DOC. 7585B
QUANTITY
2
4
4
4
4
4

Advertisement

Table of Contents
loading

Table of Contents