Installation - Crestron TPMC-4SM Installation & Operation Manual

4.3" Room Scheduling Touch Screen
22 • 4.3" Room Scheduling Touch Screen: TPMC-4SM
TPMC-4SM with No-Button Covers

Installation

The TPMC-4SM touch screen installs simply and cleanly into a standard electrical
box or on to virtually any flat surface.
A table top enclosure, the TTK-4SM and a swivel mount, the SMK-4SM, are also
available (both sold separately). For mounting onto a flat surface, use the
MSMK-4SM Multi-Surface Mounting Kit (sold separately).
The TPMC-4SM is supplied with screws for installation into an electrical box.
Mounting in a US Electrical Box
NOTE: When mounting the TPMC-4SM into an electrical box, the box must be
installed horizontally.
To mount the TPMC-4SM into an electrical box, use the following procedure:
1. Insert a small slot-head screwdriver into the hole shown in the following
illustration and gently separate the back of the TPMC-4SM.
Insertion Point for Separation of Back Panel
Insert screwdriver to separate back of TPMC-4SM
2. Use the two included #06-32 x 1 1/2" screws (2007254) to attach the back
panel to a horizontally mounted electrical box, as shown in the following
illustration.
Crestron TPMC-4SM
Installation & Operations Guide – DOC. 6845F