Section 8
Disassembly
Balance Weight Disassembly
If necessary, the balance weight assembly can be
required.
carefully remove the key from the keyway. See
Figure 8-54. Removing Crank Gear Key.
2. Remove the guide shoe from the guide pin on
No. 3618005213)
link from the guide pin on the PTO side of the
assembly (
the two balance weight halves together on the
weight design with the closure plate side guide
shoe. The guide pin is on PTO side for the
balance weight design with the lower control
link. Hold the guide pin with wrench or torx bit
socket as required. Do not hold or damage the
outside diameter (O.D.) of the guide pin. See
8.14
Figure 8-55. Removing Balance Weight Screw
(Guide Shoe Design Before Serial No. 3618005213).
Before Serial
. See
Figure 8-56. Removing Balance Weight Screw and
Guide Pin (Control Link Design After Serial No.
3618005223).