Remove Piston from Connecting Rod
1. Remove the wrist pin retainer and wrist pin.
Separate the piston from the connecting rod. See
Figure 8-50. Separating Piston from Connecting
Rod.
Remove Piston Rings
1. Remove the top and center compression rings
2. Remove the oil control ring rails, then remove the
spacer.
Figure 8-51. Removing Piston Rings.
Remove Crankshaft and Balance Weight
Assembly
weight assembly from the crankcase. See Figure
Figure 8-52. Removing Crankshaft and Balance
Weight Assembly (Before Serial No. 3618005213).
51.
Figure 8-53. Removing Crankshaft and Link (After
Serial No. 3618005223).
Section 8
Disassembly
Serial No. 3618005223,
8.13
8